Grinding | Turning |Arnold
SD 2093 Wire Serving/Covering Machine|
Milling
Grinding
Growing with the needs of
its customers, Arnold has become widely recognized as a leader
in the field of precision grinding. With over 25
grinding machines and over 50 years of grinding experience,
Arnold provides quality products at low cost.
CYLINDRICAL AND CENTERLESS
GRINDING
Arnold specializes in cylindrical and form centerless
grinding. CNC cylindrical, internal, honing and surface
grinding services are also offered.
| CYLINDRICAL
- CENTER TYPE |
Diameters
.030" to 14"
Lengths to 40" |
| CENTERLESS
- MINIATURE |
Diameters
.004" to .470"
Plunge Lengths to 2.5"
|
| SURFACE |
16" x
32"
|
Back to Top
Turning Drawing
on its extensive experience and utilizing the latest CNC
technology, Arnold manufactures parts that consistently meet
the precise requirements of its customers' specifications.

With
a bar feed capability of diameters up to 21/2 inches plus
chucking of up to 12-inch diameters by 18-inch lengths, it is
possible to fulfill a wide variety of machining applications.
In addition to CNC turning, a large selection of multi-spindle
automatics, turret lathes and screw machines are employed.
Whether your requirements are for high production or short
run, Arnold has the machinery to accommodate your
manufacturing needs.
| CNC |
12" Swing x 18"
Between Centers
2.5" Bars
4 Axis
|
MULTI-SPINDLES
|
5 & 6 Spindle Screw,
2.25" Diameter |

Back to Top
Milling
Arnold understands the importance of producing quality
machined parts by the most economical means possible. To that
end, Arnold offers its customers a wide range of milling
applications, including CNC milling and manual milling both
vertical and horizontal at capacities up to 20 x 40 x 22
inches. A full line of production drilling, deburring and
cleaning operations are also available.
|
CNC -
VERTICAL |
20" W x 40" L x
22" H Cube
|
Back to Top
Arnold
SD 2093 Wire Serving/Covering Machine
Wire Serving/Covering Machine consists of multiple positions
of double (two covers) serving, with each position
individually controlled from a Computerized Head End. All of
the features listed below reflect standard specification for
each position.
- Two (2) electric spindles with speeds of 3,000 to 20,000
RPM.
- Spindle sensors to monitor temperature and speed for
feedback to CPU.
- Spindle bore of 6mm (.24").
- Red and yellow start/stop trouble indicator
lamps/switches.
- Free standing creel let-off that will accomodate up to
12" diameter x 10" traverse spools. Larger
let-offs are also available at special request. Each creel
position has variable adjustable tensioning.
- Independent take-ups to accomodate up to 12"
diameter x 10" spool. Each position can be separately
programmed for wire size and traverse length for precision
lay of wire. Actual traverse length must be manually set.
- Full enclosure guarding allowing safe access to each
position even when an adjacent position is in operation.
- Voltage 230 VAC, 3 phase.
- Machine is field expandable up to eighty (80) positions
in increments of two and ten positions.
Machine Dimensions with Standard Creel
Length: 900 mm Two Position
Length: 4,500 mm Ten Position
Width: 1,800 mm
Height: 2,000 mm
Back to Top
|